Hydraulic Hose Fitting Japan 1/2 2AT S27
- SAE J1453, SAE J514, and ISO 8434-1.
- SAE Corrosion requirements of 72 hours without red rust, lasting up to 1,000 as found by an independent test facility.
- This enhanced performance provides customers with a competitive advantage through extended equipment life, leading to increased revenues and reduced warranty costs.
- Offered in steel, stainless steel and brass in size 1/8 inch through 2 inch with pressures up to 7700 psi.
Hydraulic Hose Fitting Japan 3/8 2AT S22
- SAE J1453, SAE J514, and ISO 8434-1.
- Steel fittings substantially exceeded the SAE Corrosion requirements of 72 hours without red rust, lasting up to 1,000 as found by an independent test facility.
- Parker's Trap-seal for seal-Lok ORFS fittings improves customer experience by eliminating potential hydraulic leaks caused by O ring fall-out and Oring pinch during assembly.
- Offered in steel, stainless steel and brass in size 1/8 inch through 2 inch with pressures up to 7700 psi.
Hydraulic Hose Fitting Japan 5/8 4AT S30
- BSPP and BSPT port ends and two styles of hose ends, T4, 30 angle flare BSPP threads, and P4, 60 angle cone BSPP threads.
- The T4, 30 angle flare BSPP threads, and P4, 60 angle cone BSPP threads, Interfaces provide end user flexibility of connecting to the most common Parker hose ends available: Series UT, GU, G1, G2 and FU.
- Available in steel in sizes 1/4inch through 1 inch with working pressures up to 5000 psi.
Hydraulic Hose Fitting Japan 5/8 4AT S36
- SAE J1453, SAE J514, and ISO 8434-1.
- SAE Corrosion requirements of 72 hours without red rust, lasting up to 1,000 as found by an independent test facility.
- This provides customers a competitive advantage while leading to reduced overall cost.
- Offered in steel, stainless steel and brass in size 1/8 inch through 2 inch with pressures up to 7700 psi.
Hydraulic Hose SAE 100 R15 – ISO 3862-R15
Hydraulic Hose SAE 100R1 AT / DIN20022 EN 853 1SN
Hydraulic Hose SAE100 R2/EN 853 2SN
Hydraulic Hose SAE100 R3
- INNER TUBE: oil resistant synthetic nitrile rubber
- REINFORCEMENT: two layers of high strength fiber braided
- COVER: oil and weather resistant synthetic rubber
- SURFACE: wrapped surface,smooth surface
- Hydraulic Hose SAE 100 R3 TEMPERATURE RANGE: -40℃ (-104℉ ) to +100℃(+212℉)
- Hydraulic Hose SAE 100 R3 STANDARD: SAE 100 R3
Hydraulic Hose SAE100 R4
- Inner Tube: oil resistant synthetic nitrile rubber
- Reinforcement: 2 layer or 4 layers of high strength synthetic textile and helix steel wire
- Cover: oil and weather resistant synthetic rubber
- Surface: wrapped surface
- Hydraulic Hose SAE100 R4 Temperature Range: -40℃ (-104 ℉ ) to +100℃(+212 ℉)
- Hydraulic Hose STANDARD: SAE 100 R4