Hydraulic Hose Fitting Japan 5/8 4AT S30

BSPP and BSPT port ends and two styles of hose ends, T4, 30 angle flare BSPP threads, and P4, 60 angle cone BSPP threads.
The T4, 30 angle flare BSPP threads, and P4, 60 angle cone BSPP threads, Interfaces provide end user flexibility of connecting to the most common Parker hose ends available: Series UT, GU, G1, G2 and FU.
Available in steel in sizes 1/4inch through 1 inch with working pressures up to 5000 psi.

Description
Reviews (0)
Thông số kỹ thuật

Hydraulic Hose Fitting Japan 5/8 4AT S30

Adaptors series with a mechanical connection realized on a 60° conical seat. These items ensure the absence of leakages (also under the presence of gases), good resistance to high tightening, and easiness of assembly with the possibility to make repeated assemblies and disassemblies. Suitable for high pressures.

Hydraulic Hose

Figure 1. Hydraulic Coupling & Fittings

Hydraulic Hose

Figure 2. Hydraulic Coupling & Fittings

Hydraulic Hose

Figure 3. Hydraulic Coupling & Fittings

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hydraulic Hose Fitting Japan 5/8 4AT S30”

Thông số kỹ thuật

Maximum Operating Pressure:	42,0 MPa 6000 psi 420 bar
Hose I.D.(size):	3/4 to 1-1/4 inch 19,1 - 31,5 mm
Operating Temperature:	-40 °C -40 °F to 100 °C 212 °F (Air) 70 °C (Water) 85 °C
Hose Reinforcement Material:	Four or six spirals high-tensile steel wire

Hydraulic Hose Fitting Japan 5/8 4AT S30