RYCO Hydraulic Hose SAE100 R1 / EN 853 1SN

TUBE: Black, oil resistant synthetic rubber.
REINFORCEMENT: Four alternating layers of spiralled high tensile steel wire.
COVER: DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Extra thin cover suitable for non-skive and skive couplings. Highly visible layline branding for easy and permanent identification. No skiving required with T6000 and T7000 Series Crimp Couplings.

Description

RYCO Hydraulic Hose SAE100 R1 / EN 853 1SN

Instead of wires crossing each other, the RYCO spiral wire hoses remain parallel as they wrap around the hose.

Spiralled hoses offer increased strength are you will find these hydraulic hoses in everything from lawn tractors to large, off-road, and highly specialised equipment.

RYCO’s spiral hose range H12D, H12S, R4SPD and R4SHD all include four alternating layers of spiralled high tensile steel wire reinforcement.

Spiral hoses offer variances in strength and flexibility to suit certain applications, so it is important to understand what each spiral hose is designed for.

Ryco 5

Figure 1. Hydraulic Hose

Ryco 2

Figure 2. Hydraulic Hose

Ryco 4

Figure 3. Hydraulic Hose

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “RYCO Hydraulic Hose SAE100 R1 / EN 853 1SN”

SPECIFICATION

RYCO Hydraulic Hose SAE100 R1 / EN 853 1SN

Original:

Germany

Brand:

RYCO

Period of Guarantee:

12 Month

Features - Benefits:

FRAS – FLAME RESISTANCE AND ANTI-STATIC: DIEHARD™ complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.

Application:

Markets:
• Transportation
• Military
• Agriculture
• Forestry
• Utility Equipment
• Waste & Refuse
• Material Handling
• Industrial
Applications:
• Petroleum base hydraulic fluids and lubricating oils
Compatible Fittings:
• 43 series fittings

Specification:

Extra high pressure hydraulic oil lines.
TUBE: Black, oil resistant synthetic rubber.
REINFORCEMENT: Four alternating layers of spiralled high tensile steel wire.
COVER: DIEHARD™ Black, oil and extra abrasion resistant synthetic rubber. Flame Resistant, Anti-Static (FRAS) & MSHA compliant. Extra thin cover suitable for non-skive and skive couplings. Highly visible layline branding for easy and permanent identification. No skiving required with T6000 and T7000 Series Crimp Couplings.
FRAS – FLAME RESISTANCE AND ANTI-STATIC: DIEHARD™ complies with Flame Resistant and Electrical Resistance (Anti-Static) requirements of Australian Standard AS 2660 and Methods of Test AS 1180.10B and 13A. Meets Flame Resistant Designation “U.S. MSHA” of the US Department of Labor, Mine Safety and Health Administration.
TEMPERATURE RANGE: From -40°C to +100°C (-40°F to +212°F). For water, emulsions etc. see page 58.
WORKING PRESSURE: Maximum working pressures are based on 4:1 safety factor (maximum working pressure to minimum burst pressure).

Maximum Operating Pressure:	350 to 350 bar
Hose I.D.(size):	1-1/4 to 2 inch, 32 to 51 mm
Operating Temperature:	-40 °C -40 °F to 100 °C 212 °F (Air) 70 °C (Water) 85 °C
Hose Reinforcement Material:	Six high tensile steel wire braid.

RYCO Hydraulic Hose SAE100 R1 / EN 853 1SN